Special Tradeshow Coverage for FABTECH 2017
FABTECH 2017 will be held from November 6th - 9th in Chicago, Illinois. This RoboticsTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.
Special Tradeshow Coverage for FABTECH
FABTECH will be held from November 16th - 18th in Las Vegas, Nevada. This RoboticsTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.
Six-axis robotic arm called Eva, which weighs 2.3 kilograms and will cost $3,000
Suryansh Chandra claims the affordable robotic arm his company Automata is developing could lead to robots becoming as ubiquitous as desktop 3D printers.
"Today, every design studio has a 3D printer," Chandra says. "Soon, we hope to get to the point where every design studio has a robotic arm."
Chandra founded Automata together with Mostafa Elsayed five months ago, after they became frustrated by the expense and complexity of industrial robots while working at the research division at Zaha Hadid Architects.
"If you're out to get a robot today, you'd have to spend 50 or 60 thousand dollars," Chandra explains. "Our goal is to democratise robotics through a low cost hardware platform and easy to use software."
Automata's first product is a plastic six-axis robotic arm called Eva, which weighs 2.3 kilograms and will cost $3,000 (£2,000).
"Unlike industrial robots that are heavy and expensive, Eva is low cost and lightweight," Chandra says. "She can pick up 750 grams when fully outstretched and about a kilogram in a more recessed position." Cont'd...
Zebra Imaging Launches 3D Hologram Creator for Autodesk Revit
Easy Creation Process Brings Holographic Imaging to AEC Community
Records 1 to 4 of 4
Featured Product
REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution
REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm.
All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles.
REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management.
www.CableSaver.com
