IEEE Spectrum Tours NASA's Drone Research Lab
IEEE Spectrum:
The Dryden Flight Research Center (DFRC) is located approximately in the middle of nowhere, inside Edwards Air Force Base on a huge dry lake bed out in the Mojave desert. The remoteness of the area, plus the availability of over 100 square kilometers of empty flat lake bed to land on if necessary, makes Dryden a fantastic place to test out all kinds of futuristic and occasionally bizarre aircraft. And we got to meet a few of them... cont'd
Microduino: Arduino Compatible Hardware The Size Of A Quarter
Kickstarter:
The Microduino series is a 100% Arduino compatible open source hardware, compatible with Arduino IDE development environment and existing Arduino sketches.
MICRODUINO IS SMALL
Microduino is small. Its size is about a quarter (25.40mm X 27.94mm / 1.0inch X 1.1inch), much smaller than the original Arduino board.
MICRODUINO IS STACKABLE
All Microduino boards adopt a uniform U-shape 27-pin standard pin-out (UPin-27). Thus Microduino series can be easily stacked together through the UPin-27, and all modules are delivered ready to stack... cont'd
ABB Robotics Pack Expo 2013 Exhibit Highlights New 8kg IRB 360 Flexpicker
ABB Robotics:
High Speed Picking Demo
The centerpiece of the high speed picking demo is the new 8 kg IRB 360 FlexPicker with a Schmalz vacuum gripper, simulating a carton loading application by picking five liquid filled plastic bottles in a single cycle, and placing them on a conveyor. A 1 kg FlexPicker model uses vision guidance and conveyor tracking to individually pick the randomly positioned bottles off the conveyor, and place them in uniform groups back on the initial conveyor to continue the loop. Both FlexPicker models utilize ABB's PickMaster 3 software, which integrates conveyor tracking, advanced vision guidance and vision inspection capabilities in an easy-to-use programming platform... cont'd
UAV Provides Colorado Flooding Assistance Until FEMA Freaks Out
IEEE Spectrum:
There's been some terrible, terrible flooding going on in Colorado. Rain is still falling, making it difficult (or impossible) for airplanes and helicopters to get in and out of the area. Drones can fly, though, and while they're not able to pick up people or drop off supplies, they are able to make damage assessment maps to help relief agencies coordinate their efforts. Or at least, they were, until the U.S. Federal Emergency Management Agency (FEMA) showed up and grounded them... cont'd
Makeblock Aluminum Extrusion Construct Platform
The Makeblock Kickstarter was successfully funded in January and now the aluminum beams and kits are available through their online store .
The Open Hand Project
Open Hand Project Indiegogo Campaign:
What is it?
The Open Hand Project is an open source project with the goal of making robotic prosthetic hands more accessible to amputees.
The Dextrus hand is the realization of this goal, it's a robotic hand that can be put together for well under £650 ($1000) and offers much of the functionality of a human hand.
Who's it For?
The Dextrus hand is for anyone who wants an advanced robotic hand. This could be an amputee who wants a little more than a metal hook, a researcher who's looking into control systems for telepresence robots or perhaps a hobbyist who is making a humanoid robot.
2012 Venture Funding Roundup From Hizook
Hizook:
Due to the popularity of Hizook's list of VC Funding for Robotics in 2011, we figured folks would be curious how 2012 fared in comparison.... and the news is promising! cont'd
Flutter: $20 Wireless Arduino With Half Mile Range.
Kickstarter campaign :
What is Flutter?
Flutter is a wireless electronics development platform based on Arduino. With over half a mile of usable range, a powerful ARM processor, and integrated encryption, Flutter makes it easy for you to build projects that communicate across the house, across the neighborhood, and beyond.
Whether you want to check the temperature of a beer-brewing setup, have your mailbox send you a text message when the mailman arrives, control a swarm of flying robots, or just turn on your lights with your phone, Flutter gives you the range, power, and flexibility to do it.
We’re not just building circuit boards though. Our goal is simple: make it easier for engineers, makers, builders, and hackers to go farther with their projects than ever before. Even if it's their first time. We’re going to arrange and keep a set of basic electronics tutorials so getting started with Flutter is as easy as possible.
Getting Connected
Creating Flutter networks is easy, even if it’s just two boards. Specify networks in Arduino code or configure Flutter with our mobile app. Once configured, devices can enter and exit the network seamlessly. This makes it extremely easy to set up a network at home (or anywhere else) where all of your projects can reliably communicate. Flutter is like a second network for your devices.
Suitable Technologies Retains Willow Garage Talent to Further Develop Beam Remote Presence
Suitable Technologies, Inc:
Suitable Technologies, Inc., has retained a majority of employees from Willow Garage, Inc. to increase and enhance the development of Suitable Technologies' Beam™ remote presence system. Suitable Technologies will use the combined resources to further product development, sales and customer support. Beam enables users to travel instantly to remote locations using video conferencing technology, over a WiFi or cellular 4G LTE connection, that users can drive. Beam is the market's most effective and reliable solution for remote presence, providing uncompromising quality with a robust offering of features. Scott Hassan, founder of both Willow Garage and Suitable Technologies, said, "I am excited to bring together the teams of Willow Garage and Suitable Technologies to provide the most advanced remote presence technology to people around the world." Willow Garage will continue to support customers of its PR2 personal robotics platform and sell its remaining stock of PR2 systems... cont'd
JPL's RoboSimian
Jet Propulsion Laboratory :
JPL and Stanford will build a simian-inspired limbed robot to participate in the DARPA Robotics Challenge. This groundbreaking RoboSimian uses deliberate and stable operations to complete challenging tasks under supervised tele-operation while in a degraded human environment. This emphasis on stability over dynamics and deliberation over reaction will result in faster and more robust overall operations by decreasing missteps for both robot and human operator. To accomplish this end, the team will employ design methods, system elements, and software algorithms that have already demonstrated success for JPL’s unique ATHLETE and Lemur robots, JPL’s first-place DARPA ARM-S team, and Stanford’s selectively compliant DARPA ARM-H design. In particular, RoboSimian will use its four general purpose limbs and hands, capable of both mobility and manipulation, to achieve passively stable stances; create multi-point anchored connections to supports such as ladders, railings, and stair treads; and brace itself during forceful manipulation operations.
DALER: Walking Flying Robot
Laboratory of Intelligent Systems :
At the Laboratory of Intelligent Systems we are developing a novel flying platform which has the ability to move on the ground by using its wings only. Using the wings as whegs to move on rough terrains instead of adding an additional structure to the robot allows to minimize its structural mass. Therefore, this design minimizes the total weight of the platform, and thus minimizes the impact on the flight performance of the robot. The morphology of the robot is optimized for ground speed. It can move forward at 0.2 m/s (0.7 BL/s), and can rotate on spot at 25°/s. The robot is capable of walking with different gaits, it can move on different surfaces, it can overcome high obstacles, and can also navigate in rough terrains.
Robot Helps Museum Restore Paintings
Phys.org
In the basement of Madrid's Reina Sofia museum, a giant robotic machine painstakingly scans a painting by Catalan surrealist artist Joan Miro, slowly snapping hundreds of microscopic shots.
The pictures taken by the machine, which uses infrared and ultraviolet photography, will help experts determine the condition of the 1974 oil on canvas painting called "Women, Bird in the Night" in unprecedented detail.
The device lets restorers see cracks, scratches and creases as well underlying preparatory sketches and all subsequent touch-ups that would be otherwise undetectable.
Dronestagram
Dronestagram is Instagram for drones. Drone owners both professional and amateur can share their best aerial pictures with the goal of building a world map of Earth from a bird's eye view.
Johnny-Five JavaScript Arduino Framework
Johnny-Five is a new NodeJS JavaScript framework for controlling Arduino hardware. The Safari Books blog has a detailed tutorial on setting up the software and hardware . The project source is available on GitHub .
Snake Robots Deployed in Nuclear Power Plant
Tests of a modular snake robot in an Austrian nuclear power plant proved the multi-jointed, camera-headed robot can crawl through a variety of steam pipes and connecting vessels, suggesting it could be a valuable inspection tool, report researchers at Carnegie Mellon University’s Robotics Institute.
The snake robot was able to maneuver through multiple bends, slip through open valves and negotiate vessels with multiple openings. With a videocamera and LED light on its head, the snake was able to peer into holes and to get multiple views of items of interest inside the pipes.
Records 1351 to 1365 of 1566
First | Previous | Next | Last
Featured Product
3D Vision: Ensenso B now also available as a mono version!
This compact 3D camera series combines a very short working distance, a large field of view and a high depth of field - perfect for bin picking applications. With its ability to capture multiple objects over a large area, it can help robots empty containers more efficiently. Now available from IDS Imaging Development Systems. In the color version of the Ensenso B, the stereo system is equipped with two RGB image sensors. This saves additional sensors and reduces installation space and hardware costs. Now, you can also choose your model to be equipped with two 5 MP mono sensors, achieving impressively high spatial precision. With enhanced sharpness and accuracy, you can tackle applications where absolute precision is essential. The great strength of the Ensenso B lies in the very precise detection of objects at close range. It offers a wide field of view and an impressively high depth of field. This means that the area in which an object is in focus is unusually large. At a distance of 30 centimetres between the camera and the object, the Z-accuracy is approx. 0.1 millimetres. The maximum working distance is 2 meters. This 3D camera series complies with protection class IP65/67 and is ideal for use in industrial environments.
