Midwest Motion Products - MMP D22-376B-12V GP52-014 EU-1024
Brushed 12V DC Gearmotor with 1024 CPR integral optical feedback encoder. Capable of producing up to 16 in-lbs continuous torque and 34 in-lbs peak torque with an output speed of 206 RPM
Description:
• Capable of producing up to 16 in-lbs continuous torque and 34 in-lbs peak torque with an output speed of 206 RPM.
• IP54 protected and under 2.5" diameter and under 8.0" total length and weight is 4.0 lbs.
• Contact us to get the datasheet to this model.
• Encoder-Compatible, Brake-Compatible or both rear shaft designs available.
• Samples readily available - can be built from Stock Materials, usually within just a day or two!
• Short Production Lead-times - weeks, not months!
Midwest Motion Products, Inc.
• Reputable, Minnesota USA based Corporation - Serving the Motion Control Industry since 2001.
• 8,000 Released DC Gearmotor Designs and 2,000,000 Individual Part Numbers.
• Lightning-Fast Delivery of Prototype Samples.
• High Volume Capacity - Annual Production Capacity 50,000+ Units.
• On-Time Production Delivery Rate is > 96%
• Incremental (Monthly or Quarterly) deliveries on Annual Blanket Orders.
• Excellent Tech Support - many decades of collective Industry-Specific experience on Staff.
• Facility built in 2014 and expansion added in 2019.
• Rapid Prototyping Services to help Design and Engineer Ideas into Reality.
Featured Product
REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution
REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm.
All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles.
REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management.
www.CableSaver.com
