ATI INDUSTRIAL AUTOMATION INTRODUCES NEW CAPACITIVE SIX-AXIS FORCE/TORQUE SENSOR
A low-cost solution for industrial robots
The NEW Capacitive F/T Sensor, a low-cost solution for industrial robots, pressing force control, grinding, deburring, etc., was recently introduced by ATI Industrial Automation, Apex, NC. The Capacitive F/T Sensor measures the full six components of force and torque (Fx, Fy, Fz, Tx, Ty, Tz). The sensor is IP65-rated for protection against dust and water spray and hard mechanical stops are implemented for overload protection. Easy output options include computer connection via optional USB and Ethernet conversion cables.
The Capacitive F/Ts Force Range (Fx, Fy, Fz) is 45 lbf (200 N) and Torque Range (Tx, Ty, Tz) is 35 in-lb (4 Nm). Output options include an Ethernet conversion box that allows connection to Ethernet networks, USB conversion cables that allow connection to a personal computer or other devices and is powered by the USB output, and RS-422 serial connection, which provides unterminated wires for data signals and user 5 VDC power input.
ATI also offers a wide range of custom and standard silicon strain gage-based sensor models from 17 mm to 330 mm and include environmental protection (IP) on most models. All ATI F/T Sensors measure six components of force and torque (Fx, Fy, Fz, Tx, Ty, Tz), and feature a compact design, hardened stainless steel construction, high-speed output, overload protection, span temperature compensation options, and high signal-to-noise ratio.
ATI Industrial Automation is a world-leading, engineering-based developer of robotic peripheral equipment, including Automatic Tool Changers, Multi-Axis Force/Torque Sensing Systems, Robotic Deburring Tools, Robotic Collision Sensors, and Compliance Devices. ATIs engineering department, the largest of its kind for a robotic tooling company, is focused on developing cost-effective, state-of-the-art products and solutions that improve robotic productivity.
For more information about the Capacitive Six-Axis Force/Torque Sensor and other ATI products, contact ATI Industrial Automation, 1031 Goodworth Drive, Apex, NC 27539, phone
919-772-0115, fax 919-772-8259, www.ati-ia.com.
Featured Product
The piCOBOT Electric vacuum generator
Fully electric, slim design and absence of air-tubing and cabling. The new piCOBOT® Electric heads towards another success for Piab's piCOBOT® program. A secondary effect of these achievements is the absence of entangling air tubing and cabling. It simplifies the installation, and as the new piCOBOT® Electric only needs a single connection on the cobot arm, the clean set-up allows a completely unrestricted movement. The new piCOBOT® Electric package will contain plug & play software to fit UR e-series cobots, but many other useful adaptations will be introduced in the coming year
