Rise of eCommerce

Why the sudden drive to improve warehousing and logistics processes? There has been a focus on smart warehousing and logistics with the rise of ecommerce. It has been growing steadily over the past 5 years by about 19% a year. Then the pandemic accelerated ecommerce growth by over 30%. Consumers avoided stores and opted for online shopping amid safety concerns. This rapid growth has businesses scrambling to improve their warehouse and logistics workflow. 

Considerations for the Best PC for Smart Warehousing and Logistics

In order to facilitate the massive transfer of goods around the world, warehousing and logistics companies are turning to IoT devices and processes to best equip their teams. So what are the considerations for the best PC for smart warehousing and logistics? It boils down to three things: 

1. Location
2. Connectivity
3. Software Requirements

Consideration 1 for Best PC for Smart Warehousing: Location, Location, Location

The location of your equipment will drive many of your requirements. At a minimum, an Industrial Fanless PC will offer protection against dust and other particulates in your warehouse. One of the leading causes of PC failure are computer fans and spinning hard drives. All those moving parts are prone to failure which can result in downtime. 

Solid state fanless PCs eliminate both of these failure points to ensure maximum reliability of your system. As an example, if you place a PC behind a TV screen near the ceiling to give real-time feedback or work instructions, the last thing you want to do is send a technician up on a scissor lift to swap out hardware.

Consider an industrial panel PC for intuitive and convenient access to machine controls. Automated warehousing solutions frequently utilize an all-in-one touchscreen computer to offer human/machine interface (HMI) control for robots, machinery and vehicles.

Look to a Rugged PC Solution for more Extreme Locations

However, you may need more protection if your desired installation is located in an area that gets very hot or very cold. For example, if you have scanning and label printing systems that are located right next to the receiving dock, you’ll want to consider if the temperature drops below freezing in the winter. Or if the temperature gets above 100°F in the summer. If so, you may want to consider a rugged PC. If the computer is mounted on a forklift or other moving equipment, rugged PCs also offer protection from shock and vibration that may cause failures in a traditional PC.

Consideration 2 for Best PC for Smart Warehousing: Connectivity at the Edge

When looking at the data flow for a typical smart warehousing project, it can be simplified into these steps:

1. Local devices collect data from machinery, shipments, or sensors.
2. The data is processed either by an on-site gateway or in the cloud.
3. The data is fed into a warehouse management system or similar software.

Which raises the question: How do we get data from local equipment, sensors, robots, or shipments we need to track to where it ultimately needs to go? Simply put, what type of connectivity do we need?

Wired vs. Wireless Connectivity

There are two ways to accomplish efficient data transfer: direct wired I/O connectivity with the computer, or wireless connectivity. Wired connectivity is good for when the PC will always be in the same place in relation to the machinery. For example a PC integrated into a material handling system (MHS) can get data through its ethernet ports, or a PC connected to a forklift can collect data through the CAN Bus for equipment health monitoring. 

Whereas wireless connectivity excels when the data needs to hop from one device to another or the object being monitored is moving around. Take our example of the forklift monitoring device. You wouldn’t connect cables to push the data to a server as the forklift will be in motion, the same goes for picking robots in automated warehouses.

Consideration 3 for Best PC for Smart Warehousing: Software Requirements

When looking for the best PC for smart warehousing, one of the first questions to answer is what software is going to be deployed? You may already have a software package you are tying into or maybe you are looking for something new.

When integrating an existing software package, consider the desired level of access for each operator. For example, the thin clients for your picking team will likely need less compute power than a supervisor running local controls software for the entire facility. Your choice of hardware should reflect this. There is seldom a one-size fits all approach for outfitting your entire warehouse. 

Working with hardware that comes pre-imaged or pre-certified for your desired software solution can help save you time and integration delays, whether you’re setting up SCADA/MES, Thin Clients, AWS Greengrass, or any other solution.

Today’s warehousing and logistics operations are leveraging technology in so many ways. The pace of growth and innovation is truly astounding. Keeping up is about understanding what you’re trying to do and then finding the right partners who can help you get the best solution for your needs.

The content & opinions in this article are the author’s and do not necessarily represent the views of RoboticsTomorrow

OnLogic

A global industrial PC manufacturer and solution provider focused on hardware for the IoT edge, OnLogic designs highly-configurable computers engineered for reliability. Their systems operate in the harshest environments and power innovation in the evolving Internet of Things. Founded in 2003 as Logic Supply, the company has served more than 70,000 customers. OnLogic has offices in the US, Netherlands, Taiwan and Malaysia.

Other Articles

Edge Computing and AI in Manufacturing

With Tacton we wanted to give users the flexibility and configuration options they need to outfit their facility, while ensuring the system was reliable, secure, and easy to install.

Managing Robots with Plus One Robotics

As e-commerce grows, customer demand requires logistics centers to handle daily shipments that change constantly. As a result, a pallet will get stacked with a variety of items, resulting in a mixed pallet.

More about OnLogic

Featured Product

3D Vision: Ensenso B now also available as a mono version!

This compact 3D camera series combines a very short working distance, a large field of view and a high depth of field - perfect for bin picking applications. With its ability to capture multiple objects over a large area, it can help robots empty containers more efficiently. Now available from IDS Imaging Development Systems. In the color version of the Ensenso B, the stereo system is equipped with two RGB image sensors. This saves additional sensors and reduces installation space and hardware costs. Now, you can also choose your model to be equipped with two 5 MP mono sensors, achieving impressively high spatial precision. With enhanced sharpness and accuracy, you can tackle applications where absolute precision is essential. The great strength of the Ensenso B lies in the very precise detection of objects at close range. It offers a wide field of view and an impressively high depth of field. This means that the area in which an object is in focus is unusually large. At a distance of 30 centimetres between the camera and the object, the Z-accuracy is approx. 0.1 millimetres. The maximum working distance is 2 meters. This 3D camera series complies with protection class IP65/67 and is ideal for use in industrial environments.

More Products

Feature Your Product